Skip to content

Contributing to EasyBuild

To contribute changes to the EasyBuild code (framework or easyblocks) or easyconfigs, you will need to be a bit familiar with Git and GitHub. Or maybe not?

Manual contribution procedure

0) Create and setup a GitHub account (and register your SSH public key);

1) Clone and fork the appropriate GitHub repository, for example when contributing an easyconfig file:

git clone git@github.com:easybuilders/easybuild-easyconfigs.git
cd easybuild-easyconfigs
git remote add my_fork git@github.com:your_github_account/easybuild-easyconfigs.git

You should change 'your_github_account' in the last line to your own GitHub user name!

2) Create and check out a new branch, starting from the (up-to-date) develop branch:

git checkout develop
git pull origin develop
git checkout -b example

3) Stage the changes you want to contribute, after you make sure that your easyconfig file has the correct filename, and that it's located in the appropriate directory.

mkdir -p easybuild/easyconfigs/e/example/
mv example.eb easybuild/easyconfigs/e/example/example-1.2.3-GCC-9.3.0.eb
git add easybuild/easyconfigs/e/example/example-1.2.3-GCC-9.3.0.eb

4) Commit those changes with a sensible commit message:

git commit -m "This is just an example"

5) Push your branch to your fork of the repository on GitHub:

git push my_fork example

6) Open the pull request through the GitHub web interface, making sure that:

  • the target branch is correct (should be develop);
  • an appropriate title is used;
  • a short description of the changes is provided;
  • the changes are indeed the ones you want to propose;
  • clicking the (correct) green button;
Pfft

That didn't exactly motivate you to contribute, did it...

Github integration features

Over the years we noticed that some people were keen on contributing to EasyBuild, but they were not very familiar with Git or GitHub. That meant they had to overcome a relatively steep learning curve before they could contribute...

Gandalf vs Git

In addition, the contribution workflow can be a bit daunting and time consuming, even if you're already familiar with the procedure. You will have dozens of branches flying around in no time, and if you get stuck in a weird corner with git you may quickly end up demotivated.

This is frustrating not only for the people who wanted to contribute but also for the EasyBuild maintainers, and it doesn't agree with the philosophy of a project that aims to automate tedious software installation procedures.

At the end of 2015 efforts were made to tackle this issue by implementing GitHub integration features in EasyBuild, which automate the contribution workflow by running git commands and interacting with the GitHub API.

We will briefly go over some of these features here, but they are also covered in detail in the EasyBuild documentation.

Requirements & configuration

First of all, the GitHub integration features impose a couple of additional requirements and configuration.

Additional dependencies

Both the GitPython and keyring Python packages as well as the keyrings.cryptfile add-on package must be installed. In the prepared environment, you can do this via:

pip3 install --user GitPython keyring keyrings.cryptfile

Note

You may experiences problems installing the cryptography Python packages, which is a dependency of keyring. The underlying cause is that you need to have the Rust compiler installed to install the latest version of cryptography (see here).

You can work around this issue using:

pip3 install --user 'cryptography<3.4'

SSH public key in GitHub account

You need to have a GitHub account that has your SSH public key registered in it (via https://github.com/settings/keys).

If you need to generate an SSH key pair, you can run the following command:

ssh-keygen -a 100 -t ed25519

You can copy the SSH public key from the output of this command:

cat .ssh/id_ed25519.pub

Forked repository in GitHub

In addition, you must have forked the EasyBuild repository you want to contribute to (for example https://github.com/easybuilders/easybuild-easyconfigs).

EasyBuild configuration, incl. GitHub token

You also have to configure EasyBuild a bit more, so it knows about your GitHub user name and has a GitHub token available in order to perform actions in GitHub with your credentials.

To do this, you should define the github-user configuration option and run the "eb --install-github-token" command:

# replace 'ebtutorial' with your own GitHub username!
$ export EASYBUILD_GITHUB_USER=ebtutorial
$ eb --install-github-token

To create a GitHub token:

  • Visit https://github.com/settings/tokens.
  • Click "Personal access tokens".
  • Click followed by "Generate new token".
  • Give the token a name (for example "Token for EasyBuild").
  • Select both the 'public_repo' (in the 'repo' section) and 'gist' scopes.
  • Click the green "Generate token" button.
  • Copy the generated token.
  • Paste the token when asked by --install-github-token (and hit Enter).
  • Enter a password to encrypt your GitHub token.

The output should look something like this:

$ eb --install-github-token
== temporary log file in case of crash /tmp/eb-9z0bdve9/easybuild-hfpti62w.log
Token: 
Validating token...
Token seems to be valid, installing it.
Please set a password for your new keyring: 
Please confirm the password:
Token 'fed..987' installed!

Checking status of GitHub integration

You can check the status of the GitHub integration using "eb --check-github":

$ eb --check-github
== temporary log file in case of crash /tmp/eb-4ckdlyfy/easybuild-gp69ev2w.log

Checking status of GitHub integration...

Making sure we're online...OK

* GitHub user...ebtutorial => OK
Please enter password for encrypted keyring:
* GitHub token...fed..987 (len: 40) => OK (validated)
* git command...OK ("git version 1.8.3.1; ")
* GitPython module...OK (GitPython version 3.1.3)
* push access to ebtutorial/easybuild-easyconfigs repo @ GitHub...OK
* creating gists...OK
* location to Git working dirs... not found (suboptimal)

All checks PASSed!

Status of GitHub integration:
* --from-pr: OK
* --new-pr: OK
* --review-pr: OK
* --update-pr: OK
* --upload-test-report: OK

If you see 'OK' for each of the status checks, you're all set to try out the GitHub integration features!

Note

If your SSH private key is protected with a password, you may need to enter your password a couple of times when running "eb --check-github".

You can avoid this by using an SSH agent.

Note

If you see the push access check fail with Failed to fetch branch 'main', you will need to rename the master branch in your fork of the easybuild-easyconfigs repository from master to main (this is required since EasyBuild v4.3.3).

This can be done via the pencil icon at https://github.com/YOUR_GITHUB_ACCOUNT/easybuild-easyconfigs/branches (replace YOUR_GITHUB_ACCOUNT with the name of your GitHub account in this URL).

Creating pull requests

The GitHub integration in EasyBuild allows you to create pull requests using the eb command, without even leaving your shell environment. How cool is that‽

To create a pull request to the easybuild-easyconfigs repository, you can either do it in a single go by running "eb --new-pr" and passing it one or more easyconfig files to add into the pull request.

The more detailed option is to first create a branch in your repository fork in GitHub via "eb --new-branch-github" and then later open the pull request via "eb --new-pr-from-branch". This method can be useful when preparing multiple interdependent pull requests, or to check whether your changes pass the unit tests (which are run automatically in the GitHub Actions CI environment for all branches pushed to your fork).

The --new-pr option can also be used to open pull requests to the easyblocks and framework repositories, and it will even automatically determine the target repository based on the contents of the files you provide. Whoa!

You can control the target repository for your pull request using --pr-target-account (default is easybuilders) and --pr-target-repo.

If you want you can carefully double check your work before actually opening the pull request by doing a dry run via "eb --dry-run --new-pr" or "eb -D --new-pr".

Finally, you can use "eb --preview-pr" to see how the easyconfig files for which you plan to create a pull request differ from existing easyconfig files.

Updating pull requests

To update an existing pull request with additional changes you can use "eb --update-pr" and pass the pull request ID, alongside the paths to the updated files.

If you have only created a branch (for example via eb --new-branch-github) you can update it via --update-branch-github in the same way, passing the branch name instead of a pull request ID.

Using a pull request

Next to creating and updating branches and pull requests you can also use easyconfig files and easyblocks from a pull request, regardless of its status (open, merged, or closed). This is particularly useful when testing contributions, or to install software for which support is not yet included in the latest EasyBuild release.

Using the --from-pr option you can install easyconfig files from the pull request with specified ID. By default all easyconfig files that are touched by the pull request will be installed, but you can specify particular ones to use as well. It is generally advised to also use the --robot option to ensure that the easyconfig files are installed in the correct order with respect to dependencies.

Similarly, using a new or updated easyblock from a pull request is as simple as using the --include-easyblocks-from-pr option. And of course you can combine it with --from-pr!

Via --upload-test-report you can let EasyBuild submit a comment into the easyconfig pull request to show that the installation worked on your system. This is useful for others to know, in particular EasyBuild maintainers, since the comment will include information about your system (OS, processor, etc.) and your EasyBuild configuration.

Demo

That is a lot to digest, so let us make this a bit more concrete with an example: we will open a pull request for the eb-tutorial example software to a fork of the easybuild-easyconfigs repository using the eb command, and submit a test report in it.

Note

Make sure that you have correctly configured the GitHub integration, see above.

Creating pull request

We first configure EasyBuild to target the ebtutorial GitHub account rather than the default easybuilders GitHub organisation, by defining the pr-target-account configuration setting:

export EASYBUILD_PR_TARGET_ACCOUNT=ebtutorial

In the output of "eb --show-config" you should see a line like this:

pr-target-account (E) = ebtutorial

We only do this to avoid that lots of pull requests for the eb-tutorial example software are opened in the central easyconfigs repository.

Opening a pull request is as simple as running "eb --new-pr" and passing the easyconfig file:

$ eb --new-pr example.eb
== temporary log file in case of crash /tmp/eb-ggr6scbq/easybuild-hnk271xj.log
== found valid index for /home/example/.local/easybuild/easyconfigs, so using it...
== fetching branch 'develop' from https://github.com/ebtutorial/easybuild-easyconfigs.git...
== copying files to /tmp/eb-ggr6scbq/git-working-dirxwk1fzaw/easybuild-easyconfigs...
== pushing branch '20200622095415_new_pr_eb-tutorial100' to remote 'github_ebtutorial_qgtfU' (git@github.com:ebtutorial/easybuild-easyconfigs.git)
Enter passphrase for key '/home/example/.ssh/id_rsa': 
Please enter password for encrypted keyring:

Opening pull request
* target: ebtutorial/easybuild-easyconfigs:develop
* from: ebtutorial/easybuild-easyconfigs:20200622095415_new_pr_eb-tutorial100
* title: "{tools}[GCC/11.2.0] eb-tutorial v1.0.1"
* labels: new
* description:
"""
(created using `eb --new-pr`)

"""
* overview of changes:
 easybuild/easyconfigs/e/eb-tutorial/eb-tutorial-1.0.1-GCC-11.2.0.eb | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Opened pull request: https://github.com/ebtutorial/easybuild-easyconfigs/pull/
== Temporary log file(s) /tmp/eb-ggr6scbq/easybuild-hnk271xj.log* have been removed.
== Temporary directory /tmp/eb-ggr6scbq has been removed.

Take a moment to grasp what we did here: we ran a single eb command which took care of the whole contribution procedure for us, including:

  • Cloning the easybuilders/easybuild-easyconfigs repository and checking out the develop branch (in a temporary directory);
  • Picking a sensible name for a branch and creating it;
  • Adding the eb-tutorial easyconfig file to the branch, in the correct location (easybuild/easyconfigs/e/eb-tutorial/) and with the correct filename (eb-tutorial-1.0.1-GCC-11.2.0.eb);
  • Pushing the branch to our fork (example/easybuild-easyconfigs);
  • Actually opening the pull request, using an informative title.

That is so... easy!

This feature not only significantly lowers the bar for contributing, it also saves quite a bit of time since you don't need to double check various details (like targeting the develop branch) or spend time on coming up with a nice looking title or funny branch name (although you still can if you really want to).

There are a couple of nice side effects too, like not having any local branches to tidy up on once the pull request gets merged (since --new-pr created the branch only in a temporary directory).

If many contributions are made via --new-pr it also simplifies the task of EasyBuild maintainers, since pull requests opened this way have a particular structure to them and thus are easier to digest because they look familiar.

Uploading test report

After opening the pull request, we should also upload a test report to show that the installation is working. This is just as easy as creating the pull request.

First make sure that the pre-installed software in the prepared environment is available, since the required dependencies for eb-tutorial are already installed there:

module use /easybuild/modules/all

You can verify which dependencies are still missing using --from-pr combined with --missing:

# change '1' to the ID of your own pull request (see output of --new-pr)
$ eb --from-pr 123 --missing
== temporary log file in case of crash /tmp/eb-ioi9ywm1/easybuild-e3v0xa1b.log
Please enter password for encrypted keyring:
== found valid index for /home/example/.local/easybuild/easyconfigs, so using it...

1 out of 20 required modules missing:

* eb-tutorial/1.0.1-GCC-11.2.0 (eb-tutorial-1.0.1-GCC-11.2.0.eb)

Uploading a test report boils down to combining --from-pr with --upload-test-report:

# change '1' to the ID of your own pull request (see output of --new-pr)
$ eb --rebuild --from-pr 123 --upload-test-report
Please enter password for encrypted keyring:
...
== processing EasyBuild easyconfig /tmp/eb-bnb1pv3n/files_pr65/e/eb-tutorial/eb-tutorial-1.0.1-GCC-11.2.0.eb
== building and installing eb-tutorial/1.0.1-GCC-11.2.0...
...
== COMPLETED: Installation ended successfully (took 2 sec)
...
Adding comment to easybuild-easyconfigs issue #65: 'Test report by @ebtutorial
**SUCCESS**
Build succeeded for 1 out of 1 (1 easyconfigs in this PR)
example - Linux centos linux 8.5, x86_64, Intel(R) Core(TM) E5-2660 v4 @ 2.00GHz (broadwell), Python 3.6.8
See https://gist.github.com/f7c74159c809029afd99e30e4d994ef1 for a full test report.'
== Test report uploaded to https://gist.github.com/f7c74159c809029afd99e30e4d994ef1 and mentioned in a comment in easyconfigs PR#1

Note that we may need to use --rebuild here since eb-tutorial may already be installed.

This results in a comment being added to the pull request:

Test report comment

The gist linked from this comment provides more detailed information:

Test report gist

next: Comparison with other tools - (back to overview page)


Last update: May 24, 2022